Provides control of the Spacer plus a 5th setting -- max on.

5-Zone. Commands for this device are available as part of a system layout file.

A PDF file entitled "Summary of IR Protocols to be Used for 3rd Party Remote Control Manufacturers" provided by Lutron. Includes infrared protocol information and Pronto-format hex codes. I was having trouble with learned codes downloaded here, but these straightened everything out. Even had more codes (just one for my application) than what the OEM remote had.

Spacer system preset codes for the 4 button Lutron remote. Also includes OFF and UP & DOWN codes. Use presets to set 4 scenes (set levels, press and hold a preset until dimmers flash three times).

Clean codes for scenes 1 through 8.

4-scene. Commands for this device are available as part of a system layout file.

All 15 scenes, on/off and up/down.

Includes all IR codes for the RadioRA, HomeWorks Interactive, GRAFIK Eye & Spacer.

Commands for this device are available as part of a system layout file. (TIR-MLV500-WH)

Commands for this device are available as part of a system layout file. (LN-SPS-FSIR-RP)

This module simulates presses (and hold/release events) on the buttons of a KP15 keypad in the Lutron HomeWorks Illuminations system. It communicates with the processor over IP. There's no feedback yet.

Tested codes. Includes scenes 1-5, on, off, dim, bright.

Clean codes for use with the Lutron Telume. This means you can set scene levels to your choice without buying the Lutron remote! These also work with most other Lutron IR light switches. (ETM-500M-WH)

Programmed with the hex-codes. Tested in my own home with the T2+ and works all fine. Have only found the Rania single on this page. The CML does only contain this device, so its not an whole arcive.

Preset codes including off, 4 different presets, and gradual up and down codes.

Commands for this device are available as part of a system layout file. (MIR-ITFS)

Codes for the Lutron Spacer.

Tested Lutron Homeworks IR codes.