In addition to the hard keys available on the remote, the following codes are included: Begin: 'Replay' key -- when held for 3 seconds will jump to beginning or previous bookmark. End: 'Advance' key -- when held for 3 seconds will jump to end or next bookmark. Slow: 'Play' key -- when held for 3 seconds will play in slow motion. Jump<=: 'Rewind' key -- when held for 3 seconds will jump to the previous tick mark. Jump=>: 'FFWD' key -- when held for 3 seconds will jump to the next tick mark.... (more) (RC34)

Device file for the DirecTV/Hughes satellite receiver with TiVo DVR, non-high definition model with 80GB hard drive circa 2005 found at Circuit City, Best Buy and others. Receiver does not have a power off button on remote. It does have a standby accessible through the menu system and is programmed with suitable delays on the Stby button.

DirecTV HD DVR with macros for 30+ channel icons.

Hughes' HDVR2 is a Series 2 TiVo for DirecTV. No discrete power codes, just something to get you started. (HRMC-1)

All commands from the original remote. (RC24)

Basic device screen with learned codes for all remote buttons and discrete codes for Standby 0 through Standby 9.

A complete device setup with learned codes.

Series 2 DirecTiVo on remote address 2. Perfect if you have multiple TiVos that you need to address.

I've searched and couldn't find a file with discrete codes to control power on and power off functions for the DirecTV HR20-700 (HD DVR). I determined that the discrete codes for power on DirecTV's remote only function if you have the remote programmed to control another component. I programmed a different component (hopefully this doesn't power on/off another component of yours because I chose a code one digit different from Mitsubishi TV's). I tested and it works with my DVR. The discrete power off will not turn on the unit, nor will the discrete power on turn off the unit.

A complete setup for this device. (RC34)

This is a collection of learned commands for a Hughes DirecTV/TiVo unit set to code 2. It includes macros for all TiVo Central shortcuts, plus macros for System Information and a 30-second skip that toggles 30-second skip on, performs the skip, and then toggles it off. This allows both use of 30-second skip and retains the 'skip-to-end' function.

A complete setup for this device.

All codes from the original remote control.

A complete set of codes for this device.

A device file with all learned codes and macros for various system commands (30 second skip, clock display, input status, etc.), and system shortcuts (now playing, to do list, etc.). Please refer to the documentation (Acrobat format) for answers to questions.

All remote functions, except for PIP-related keys.

A 3-panel CCF for the HR10-250. Not all buttons were included.

This has two sets of codes for the HR20, both the HR20 codes and the AVI codes which will allow a user to control two DVRs without conflicts. The layout has several buttons for other macros and jumps which can be removed for a cleaner look. Remember to set the device properties for IR or RF operation. Thanks to Daniel Tonks for the graphics!

Layout based on someone else's TiVo file. Includes discrete power.