A complete setup for this device.

Includes both ID2 and ID3.

Commands for this device are available as part of a system layout file.

I've searched and couldn't find a file with discrete codes to control power on and power off functions for the DirecTV HR20-700 (HD DVR). I determined that the discrete codes for power on DirecTV's remote only function if you have the remote programmed to control another component. I programmed a different component (hopefully this doesn't power on/off another component of yours because I chose a code one digit different from Mitsubishi TV's). I tested and it works with my DVR. The discrete power off will not turn on the unit, nor will the discrete power on turn off the unit.

In addition to the hard keys available on the remote, the following codes are included: Begin: 'Replay' key -- when held for 3 seconds will jump to beginning or previous bookmark. End: 'Advance' key -- when held for 3 seconds will jump to end or next bookmark. Slow: 'Play' key -- when held for 3 seconds will play in slow motion. Jump<=: 'Rewind' key -- when held for 3 seconds will jump to the previous tick mark. Jump=>: 'FFWD' key -- when held for 3 seconds will jump to the next tick mark. P-Off: Discrete power off. P-On: Discrete power on. Batt: Displays a message that the remote batteries are low (just for fun).

This has two sets of codes for the HR20, both the HR20 codes and the AVI codes which will allow a user to control two DVRs without conflicts. The layout has several buttons for other macros and jumps which can be removed for a cleaner look. Remember to set the device properties for IR or RF operation. Thanks to Daniel Tonks for the graphics!

Layout based on someone else's TiVo file. Includes discrete power.

All commands from the original remote.