In addition to the hard keys available on the remote, the following codes are included: Begin: 'Replay' key -- when held for 3 seconds will jump to beginning or previous bookmark. End: 'Advance' key -- when held for 3 seconds will jump to end or next bookmark. Slow: 'Play' key -- when held for 3 seconds will play in slow motion. Jump<=: 'Rewind' key -- when held for 3 seconds will jump to the previous tick mark. Jump=>: 'FFWD' key -- when held for 3 seconds will jump to the next tick mark. P-Off: Discrete power off. P-On: Discrete power on. Batt: Displays a message that the remote batteries are low (just for fun).

Device file for the DirecTV/Hughes satellite receiver with TiVo DVR, non-high definition model with 80GB hard drive circa 2005 found at Circuit City, Best Buy and others. Receiver does not have a power off button on remote. It does have a standby accessible through the menu system and is programmed with suitable delays on the Stby button.

DirecTV HD DVR with macros for 30+ channel icons.

Hughes' HDVR2 is a Series 2 TiVo for DirecTV. No discrete power codes, just something to get you started.

All commands from the original remote.

Basic device screen with learned codes for all remote buttons and discrete codes for Standby 0 through Standby 9.

A complete device setup with learned codes.

Series 2 DirecTiVo on remote address 2. Perfect if you have multiple TiVos that you need to address.

I've searched and couldn't find a file with discrete codes to control power on and power off functions for the DirecTV HR20-700 (HD DVR). I determined that the discrete codes for power on DirecTV's remote only function if you have the remote programmed to control another component. I programmed a different component (hopefully this doesn't power on/off another component of yours because I chose a code one digit different from Mitsubishi TV's). I tested and it works with my DVR. The discrete power off will not turn on the unit, nor will the discrete power on turn off the unit.

A complete setup for this device.